Continuous Laminating | Syrgis Performance Chemicals

Andonox 7030

Chemical Name:

peroxide mixtures

ANDONOX^®7030 is a mixture of ketone peroxides with dimethyl phthalate as a phlegmatiser.

Application Details:

ANDONOX^® 7030 is an initiator for the curing of most polyester resins at both room - and elevated temperatures. It is best suited for singly promoted resins using cobalt promotion alone.

Active Oxygen Content: 5.2 - 5.7%

Physical Appearance: Slightly yellow and clear liquid

Soluble In: Oxygenated organic solvents

Insoluble In: Water

Storage Temperature: Min 0°C, max 25°C

SDS

MSDS

Technical Data Sheet

Superox 46-750

Chemical Name:

acetyl acetone peroxide & cumene hydroperoxide

Superox 46-750 is an excellent liquid general-purpose cure initiator for the room temperature cure of polyester resins.

Application Details:

Superox 46-750 is formulated specifically for use in RTM and tooling resins.

Active Oxygen content: 5.6 %, max.

Physical Appearance: Water white liquid

Soluble In: Oxygenated organic solvents

Slightly soluble in: Water

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Technical Data Sheet

MSDS

SDS

Superox 46-744

Chemical Name:

dibenzoyl peroxide

CAS Numbers:

94-36-0

Superox 46-744 is a low viscosity, sprayable dispersion of dibenzoyl peroxide.

Application Details:

Superox 46-744 is specifically designed for use in “curing” unsaturated polyester and vinyl ester resins.

Technical Data Sheet

MSDS

Superox 46-731

Chemical Name:

acetyl acetone peroxide

CAS Numbers:

37187-22-7

Superox 46-731 is a clear solution of acetyl acetone peroxide (AAP), or 2, 4-Pentanedione peroxide in a phlegmatizer.

Application Details:

Superox 46-731 is an extremely effective initiator for an accelerated cure without significantly shortening the gel time in many resin systems.

Active Oxygen Content: 4.4 %, min.

Physical Appearance: Water white to straw liquid

Soluble In: Water, ethers, ketones, and alcohols

Insoluble In: Aromatic, chlorinated, and aliphatic hydrocarbons

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Technical Data Sheet

MSDS

Superox 46-727

Chemical Name:

cumyl hydroperoxide

CAS Numbers:

80-15-9

Superox 46-727 is a solution of cumyl hydroperoxide at a nominal 85% active ingredients.

Application Details:

It is an economical free-radical initiator for unsaturated polyester resins, vinyl monomers and styrenation of oils and alkyds especially suited for the cure initiation of unsaturated polyester resin systems at both ambient and

elevated temperatures.

Active Oxygen Content: 0.087

Physical Appearance: Colorless to pale yellow liquid

Soluble In: Alcohols, ketones, esters, hydrocarbons

Slightly soluble in: Water

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Technical Data Sheet

MSDS

Norox TAPB

Chemical Name:

tertiary-amyl peroxybenzoate

CAS Numbers:

4511-39-1

Norox TAPB is a liquid peroxyester product.

Application Details:

It is an effective medium temperature initiator for the polymerization and/or crosslinking of numerous monomers and resins, including nsaturated

polyester and vinyl ester resins.

Active Oxygen Content: 94.0 %, min.

Physical Appearance: Colorless liquid

Soluble In: Common Organic Solvents

Insoluble In: Water, glycerol, ethylene glycol

Storage Temperature: 8°°F or below

Technical Data Sheet

MSDS

Norox Pulcat AW

Chemical Name:

methyl isobutyl ketone peroxide

CAS Numbers:

37206-20-5

Norox Pulcat AW is a proprietary peroxide solution in phlegmatizer primarily used for cure initiation of unsaturated polyester and vinyl ester resins in the pultrusion process.

Application Details:

Norox Pulcat AW can also be used in cobalt promoted resins for ambient temperature cures.

Active Oxygen Content: 8.7 - 9.0 %

Physical Appearance: Colorless liquid

Soluble In: Phthalates

Immiscible: With water

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Technical Data Sheet

MSDS

Norox MEKP-900

Chemical Name:

methyl ethyl ketone peroxide

CAS Numbers:

1338-23-4

Norox MEKP-900 has a high hydrogen peroxide level that can offer faster gel times at low ambient temperatures in most resin systems.

Application Details:

Norox MEKP-900 is a specially formulated composition for the room temperature cure of unsaturated polyester resins.

Technical Data Sheet

MSDS

SDS

Norox Ketone Peroxide Pigments

Chemical Name:

ketone peroxide pigments

Syrgis Performance Initiators Dye Concentrates are available for selected ANDONOX and NOROX peroxide products to enable the user to ensure that the peroxide cure initiator (“catalyst”) is being uniformly mixed and applied in unsaturated polyester and vinyl ester resins.

Application Details:

BLUE & B-2 (Blue/violet) dye concentrates for point of use addition, only. RED – Non-fading red dye for most standard, low water content ketone peroxides. FR-1 – Fading red dye concentrate for many peroxide product formulations.

Colors: Blue, B-2 (Blue/violet), Red, FR-1 (Red-fades)

Specific Gravity: Blue 1.04, B-2 1.18, Red 1.40, FR-1 1.03

Soluble In: Blue: All Syrgis Performance Initiators Ketone Peroxides; B-2 & Red: Low Water Content Syrgis Performance Initiators Ketone Peroxides; FR-1: All Syrgis Performance Initiators Ketone Peroxides, Cumene Peroxides and Mixtures

Seta C.C. Flashpoint: Blue 99°C, B-2 145°C, Red 40°C, FR-1 93&degC

Suggested use, per kilogram: Blue: 3 - (16) ml., B-2: 2 - (10) ml.; Red: 2 - (10) ml.; FR-1: 9 - (13) ml.